PF 100 S
The PF 100 S system is intended for the production of internal partitions. It is a profile system without a thermal break, with a basic installation depth of 100 mm. The possibility of installing doors and various fillings inside this system is provided. Doors can be single-wing or double-wing, with glass, aluminum or wooden filling. Glazing of partitions as well as partition doors is possible with double and single glass. Double glazing implies that the fillings are installed on the outside and inside of the profile in thicknesses from 4 mm to 11 mm. Fillings can be glass, composite materials, wooden boards, etc. It is possible to install blinds (for transparent fillings) and sound insulation (for opaque fillings) between the outer and inner fillings. It is possible to install switch boxes, and carry out all the necessary electrical installation within this system.
This system is installed via the so-called "dry mounting" after finishing the treatment of the ceiling and floor, and before installing the suspended ceiling. The partition elements can be continued as needed and placed at a certain angle. Partition elements can also be very easily attached to other types of hardware (external or internal) - e.g. aluminum facade profiles, window elements and similar.
The PF 100 S partition with its installation depth of the profile and with the appropriate filling will fully satisfy all requirements in terms of acoustics and aesthetics of modern interiors. The application of the PF-100 S system is most suitable for offices, banks, libraries and all other rooms in which you want to emphasize the size and luxury of the residing space.
Technical characteristics of the system:
- frame depth: 100 mm
- depth of the filling: up to 11 mm
- noise protection: EN ISO 717-1 (Rw=35,38,45,49 dB)
- basic material: EN AW-6060
- sealing material: EPDM
- surface treatment: DIN 17611
- quality control: DIN EN ISO 9001