PF 100 system is intended for the construction of internal partitions. It is a profile system without a thermal break, with a basic installation depth of 98.5 mm. The possibility of installing doors (single-wing or double-wing) and various fillings within this system is provided. Glazing of partitions as well as partition doors is enabled with double glazing. Double glazing implies that fillings are installed on the outside and inside of the profile in thicknesses from 3 mm to 9 mm. Fillings can be glass, composite materials, wooden boards, etc. It is possible to install blinds (for transparent fillings) and sound insulation (for opaque fillings) between the outer and inner fillings. It is possible to install switch boxes, and carry out all the necessary electrical installation within this system. This system is installed via the so-called "dry mounting" after finishing the ceiling and floor treatment, and before installing the suspended ceiling. The partition elements can be continued as needed and placed at a certain angle. Partition elements can also be very easily attached to other types of hardware (external or internal) - eg aluminum facade profiles, window elements and similar. The application of the PF-100 system is most suitable for offices, banks, libraries and all other rooms in which you want to emphasize the size and luxury of the residing space.

Technical characteristics of the system:

• frame depth: 98,5 mm
• depth of the filling: up to 9 mm
• noise protection: EN ISO 717-1
• basic material: EN AW-6060
• sealing material: EPDM
• surface treatment: DIN 17611
• quality control: DIN EN ISO 9001