The TERMO 200 DA system is intended for the production of lifting-sliding doors with an integrated fixed part. TERMO 200 DA profile system with a thermal break and wooden cladding on the inside of the opening. The basic installation depth of the frame is 200 mm. The thermal break is achieved by polyamide strips of 27 and 30 mm for the frame and 18.6 and 30 m for the wing. In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene - ʎ = 0.035 W / m2K) are installed in the profile chambers and such profiles are given the letter F. Sealing was performed with EPDM seals. Doors made in a combination of wood/aluminum combine the best characteristics of both materials. The basis of these doors is aluminum, and wood with its warmth gives the interior a special note. The inner wooden door covering can be replaced if desired without removing the door thanks to a specially designed PVC buckle and groove. The aluminum/wood combination has found great application in modern architecture. A large selection of types and colors of wood that can be used in the manufacture give modern buildings an attractive appearance. Possibility of a construction of a hidden drainage of water from the frame.

Technical characteristics of the system:

• frame depth: 200 mm
• wing depth: 92 mm
• max wing weight: 330 kg
• depth of the filling: 46 mm
• polyamide strips: 27 and 30 mm (for the frame); 18.6 and 30 mm (for the wing)
• air-permeability: EN 12207 (class 4)
• watertightness: EN 12208 (klasa 9A)
• resistance to wind: EN 12210 (class C4)
• noise protection: DIN 4109
• antiburglary EN 1627
• Uw coefficient calculation: DIN EN ISO 10077-2 (≥1,1 Wm²/K)
• basic material: EN AW-6060
• polyamide strip material: PA66 GF25
• sealing material: EPDM
• surface treatment: DIN 17611
• quality control: DIN EN ISO 9001