The TERMO 65 VS and VP system is intended for the production of entrance doors and consists of groups:

• Termo 65 VS opening outwards (entrance doors with a glass filling)
• Termo 65 VS opening inwards (entrance doors with a glass filiing)
• Termo 65 VP opening inwards (entrance doors with a panel filling)

The system enables the execution of various opening schemes:

• single-wing doors
• single-wing doors with a lateral fixed part
• single-wing doors with a fixed and opening transom light
• double-wing doors
• double-wing doors with a lateral fixed part
• double-wing doors with a fixed and opening transom light

The profiles are made with a thermal break, with the basic installation frame depth of 65 mm. The thermal break is achieved by polyamide strips (22 and 18.6 mm for the frame and 18.6 mm for the wing). In order to further improve the thermal characteristics, profiled XPS rods (extruded polystyrene - ʎ = 0.035 W/m2K) are installed in the profile chambers and such profiles are given the letter F. Sealing between the wing and the frame was performed with EPDM seals.

Technical characteristics of the system:

• frame depth: 65 mm
• wing depth: 65.6 mm
• depth of the filling: up to 51 mm
• polyamide strips: 22 and 18.6 mm (frame); 18.6 (wing)
• max. wing weight: 160 kg
• air-permeability: EN 12207 (class 4)
• watertightness: EN 12208 (class 8A)
• resistance to wind gusts: EN 12210 (class C3)
• noise protection: DIN 4109
• antiburglary EN 1627
• Uw coefficient calculation: DIN EN ISO 10077-2 (≥1.7 Wm²/K)
• basic material: EN AW-6060
• polyamide strip material: PA66 GF25
• sealing material: EPDM
• surface treatment: DIN 17611
• quality control: DIN EN ISO 9001