The TERMO 75 DA system is intended for making windows, balcony doors (opening inwards) and fixed walls. It is a profile system with a thermal break and a wooden cladding on the inside of the opening. The basic installation depth of the frame is 76.5 mm. The thermal break is achieved with polyamide strips of 26 and 34 mm. In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene - ʎ = 0.035 W / m2K) are installed in the profile chambers. Sealing was performed with EPDM seals. Possible types of window opening: hinged, swivel, hinged-swivel, The system is compatible with facade systems. The hardware is systemic from the manufacturer ROTO.

Windows made of a combination of wood and aluminum combine the best characteristics of both materials. The Termo 75 DA system has high stability and can withstand high loads. The basis of this window is aluminum, and wood gives the interior a special note with its warmth. Wood represents a window mask that can be replaced after a certain time with other types and colours of wood because it is fastened with PVC buttons. The aluminum/wood combination has found great application in modern architecture. A large selection of types and colours of wood that can be used during construction give modern buildings an attractive appearance.

Technical characteristics of the system:

• frame depth: 76,5 mm
• wing depth: 97,5 mm
• depth of the filling: up to 44 mm
• polyamide strips: 26 and 34 mm
• max wing weight: 130 kg
• air-permeability: EN 12207 (class 4)
• watertightness: EN 12208 (klasa 9A)
• resistance to wind gusts: EN 12210 (class C5 /B5)
• noise protection: EN ISO 7171 (Rw=35,39,41,42 dB)
• antiburglary EN 1627 (RC2)
• Uw coefficient calculation: DIN EN ISO 100772 (≤1,0 Wm²/K)
• basic material: EN AW-6060
• cladding material: wood
• polyamide strip material: PA66 GF25
• sealing material: EPDM
• surface treatment: DIN 17611
• quality control: DIN EN ISO 9001